加工精度对方便米饭理化性质的影响

过度"精、细、白"的大米加工方式造成大量的粮食和营养浪费。为促进我国粮食适度加工政策的实施,研究大米加工精度(DOM)对方便米饭复水性质(水分含量和水分分布)、形态特征(长宽比、延长率和体积膨胀率)、颜色(L值、b值和ΔE值)、质构(硬度和黏度)和微观结构的影响及规律。结果表明,当DOM≥3%时,方便米饭的水分吸收速率、水分分布和形态特征与精白米方便米饭(DOM 12%)相近。当DOM升至6%时,方便米饭的形态特征、总体颜色ΔE值、硬度和微观结构也与精白米方便米饭相近。当DOM达到9%时,方便米饭的黏度已与精白米方便米饭无显著差异。由此可见,生产方便米饭的大米DOM范围宜为6%～9%。用此DOM范围的大米生产方便米饭,可以保留部分糠层营养物质,节约3%～6%的粮食。     

Segregation of dockage and foreign materials in wheat during loading into a 10-m diameter corrugated steel bin

Segregation of dockage and foreign materials (DFM) is an unavoidable phenomenon in bulk grain and causes many problems. In this study, distributions of DFM, and shrunken and broken kernels (SBK) were determined during loading of wheat in a 10-m diameter flat-bottom cylindrical bin. Wheat was loaded through a vertical funnel (spout) into the bin from five drop heights (1.6, 2.5, 3.4, 4.3 and 5.2 m). Samples were collected using a sampling tube (29 cm diameter and 50 cm deep) inserted vertically at five locations (0.00, 1.25, 2.50, 3.75 and 5.00 m of horizontal distances from the center) along three radii of the bin for each drop height. The impurities from each collected sample were divided into five categories with different sizes (other grains, other particles, SBK, fine particles, and dust and fragments) by sieving analyses. Impurities larger and smaller than wheat kernels were categorized as large and small impurities, respectively. Drop height significantly influenced the radial distribution of fine particles, dust and fragments, but not the distribution of other grains and other particles. Fine particles and dust and fragments mainly accumulated in the center, while SBK accumulated mostly near the wall of the bin. Both true density and apparent test weight (bulk density) of unclean wheat and test weight of clean wheat significantly changed along the radius of bin. Apparent test weight of unclean wheat was minimum in the center and close to the wall of bin. Drop height did not influence true density and apparent test weight of clean and unclean wheat. Thousand kernel weight, dimensions, and sphericity of wheat kernels were similar at different radial locations of bin for all drop heights. This study can be used as a reference for further studies on grain handling and associated effects on grain grading system and design of aeration, drying, and insect control. .     

Investigation on standard entropy change of metal hydrides and work function of metals

We focused on the work function of metals as an index of ion binding property between metals and hydrogen and analyzed the relation between the standard entropy change of metal hydrides and the work function of metals (alloys). The standard entropy change of saline hydrides and metallic hydrides roughly increased with the work function. It was indicated that hydrogen storage alloys consist of metal elements A and B whose work functions are small and large, respectively. The standard entropy changes of alloy-based metal hydrides with different composition ratio ΔS⁰ linearly increased with the work functions of the alloys W_c. W_c also linearly increased with the bulk modulus B_c. Then, it was found that ΔS⁰ was proportional to the standard heat of formation ΔH⁰ because dW_c/dB_c, dΔS⁰/dW_c and dΔH⁰/dB_c are constant.     

Recent progress of the gas diffusion layer in proton exchange membrane fuel cells: Material and structure designs of microporous layer

Proton exchange membrane fuel cells (PEMFCs) have become the most attractive power supply units for stationary and mobile applications. The operation, design characteristics, as well as performance of PEMFCs, are closely related to the multiphase transport of mass, heat, and electricity in the cell, a critical of which is the gas diffusion layer (GDL). It is very important to guarantee the transmission of water and gasses under high current density, and which is the weakness of PEMFCs at present. Microporous layer (MPL) is considered to be the key variable for mass transfer, so varieties of works focus on modification of MPL materials and its structure design. However, there is still a lack of special review to summarize and prospect the progress of MPL in recent years. This review article therefore focuses on the insights and comprehensive understanding of four critical issues of the MPL, the porosity, pore size distribution, wettability, structural design and the durability of MPL. At last, the conclusion and recommendations section summarized the future prospects and recommendations for possible research opportunities.     

Effect of water distribution in gas diffusion layer on proton exchange membrane fuel cell performance

Water management of proton exchange membrane fuel cells remains a prominent issue in research concerning fuel cells. In this study, the gas diffusion layer (GDL) of a fuel cell is partially treated with a hydrophobic agent, and the effect of GDL hydrophobicity on the water distribution in the fuel cell is examined. First, the effect of the position of the cathode GDL hydrophobic area relative to the channel on the fuel cell performance is investigated. Then, the water distribution in the fuel cell cathode GDL is observed using X-ray imaging. The experimental results indicate that when the hybrid GDL's hydrophobic area lies on the channel, water tends to accumulate under the rib, and the water content in the channel is low; this improves the fuel cell performance. When the hydrophobic area is under the rib, the water distribution is more uniform, but the performance deteriorates.     

Fuzzy approximation-based adaptive control of nonstrict feedback stochastic nonlinear systems with time-varying state constraints

This article develops an approximation-based fuzzy control scheme for nonstrict feedback stochastic nonlinear systems (NFSNS) with time-varying state constraints. The difficulty in constructing controller is how to conquer the algebraic loop problem caused by nonstrict feedback structure, as well as prevent the state constraints from violating. To dispose the time-varying state constraints, time-varying barrier Lyapunov function is incorporated into the backstepping design framework. The lumped uncertainties of NFSNS are approximated by the fuzzy logic systems. By virtue of fuzzy basis function, the algebraic loop problem is effectively handled. Theoretical analysis shows that the predefined state constraints are not violated and all signals of the closed-loop systems are bounded. Finally, simulation results substantiate the validity of the devised method.     

用背角准弹散射研究近库仑势垒能区重离子核反应

利用背角准弹散射的方法开展了近库仑势垒（近垒）能区重离子核反应机制的研究。高精度测量了深垒下能区16O+152,154Sm、184W、¹⁹⁶Pt和²⁰⁸Pb等体系的背角准弹散射激发函数，用耦合道计算抽取了核势的表面弥散参数，结果表明考虑耦合道效应得到的表面弥散参数值正常。基于背角准弹散射势垒分布对核结构的敏感性，尝试用深垒下能区16O+152Sm、170Er和174Yb等体系的背角准弹散射来抽取形变靶核的十六极形变参数，所抽取值与已有结果趋势一致，说明了该方法的可行性。此外，研究了弱束缚核体系的破裂效应，其表现为背角准弹势垒分布较全熔合势垒分布向低能移动，所得结果进一步说明势垒分布同时含有核结构和核反应机制的信息。     

我国环境土壤中的重要超铀核素分布

Pu、Am、Np是3种重要的超铀核素，环境中的这些核素主要来源于人类的核活动，包括大气层核武器试验、核设施排放和核事故释放等。这些超铀核素不仅具有放射性，还兼具化学毒性。我国地域辽阔，环境土壤类型丰富，在当前核电事业蓬勃发展的背景下，建立和扩大我国环境土壤中这些重要超铀核素的“准本底”数据库是辐射环境安全评价的重要组成部分，也是公众关心的热点问题。近30多年来，研究人员对我国不同环境土壤中这几种超铀核素从不同科学角度开展了调查测量研究。本文对此进行整理和分析，对我国环境土壤中这些重要超铀核素（主要是Pu核素，还包括241Am和237Np）的来源、浓度水平和分布特征进行讨论和综述，为辐射环境安全评价奠定基础。     

多约束下距离加权最优滑模末制导律

为解决多约束下制导炮弹的精确制导问题,采用带有相对距离权函数的最优滑模末制导律,将权函数引入到最优制导律中,通过改变制导炮弹的运动轨迹、运动时间,进而增强制导精度。针对单权函数难以同时满足制导精度与导引头视线角、过载等约束的问题,采用不同权函数的分段加权方法解决加权最优末制导引起的制导问题。结合滑模变结构控制理论,设计分段加权最优滑模末制导律,增强制导系统的抗干扰能力。仿真验证结果表明,该末制导律既能解决过载、导引头视线角、落角等多约束情况下的精确制导问题,同时又具有一定的鲁棒性。